Tungsten carbide concave radius burr EDGE V14x12mm shank dia. 6mm HICOAT coating defined work on edges, edge rounding radius 2.0mm

Technical information

Cut: EDGE HC-FEP
Dia. ball bearing: 10 mm
Dia. external: 14 mm
Dia. shank: 6 mm
Length, construction: 12 mm
Length, cut: 2 mm
Length, total: 52 mm
RPM, grey cast iron, white cast iron: 14500 - 23000 RPM
RPM, hard non-ferrous metals: 5500 - 7500 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 14500 - 19500 RPM
RPM, high-temperature-resistant materials: 5500 - 10500 RPM
RPM, soft non-ferrous metals: 14500 - 23000 RPM
RPM, steels up to 1,200 N/mm²: 14500 - 23000 RPM
Radius corner design: 2 mm
Packaging unit: 1 piece

Description

Tungsten carbide burrs with the EDGE HC-FEP cut have been especially developed for defined work on edges. The special design allows the burr to run directly along the edges without damaging the workpiece. In just one step, it is possible to achieve precise edge shapes. Among other things, rounding edges is a precautionary measure for anti-corrosion protection according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198).

Concave radius burrs for the production of precise radii. Suitable for the production and processing of 2, 2.5 and 3 mm outer radii.

Special features

High-quality HICOAT coating for high hardness and wear resistance.
Special design for precise guidance.
Safe and comfortable to guide.
Creates exact edge shapes in one single step.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use the burrs counterrotationally. In order to produce a fine surface, finally pass them over the edges in the direction of rotation.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Chamfering; Deburring; Milling; Rounding; Working on edges; Working on edges (chamfering, rounding)

Drive types: Automated centres; Robot; Straight grinder; Tool machine

Downloads

Tungsten carbide burrs for high performance, EDGE, concave radius burrs V EDGE HC-FEP

Tungsten carbide concave radius burr EDGE V14x12mm shank dia. 6mm HICOAT coating defined work on edges, edge rounding radius 2.0mm

V 1412/6 EDGE R2,0 HC-FEP

PFERD TOOLS Newsletter subscription