Tungsten carbide burrs for general use, cut 3 PLUS ball shape KUD

Tungsten carbide burr ball KUD dia. 04x03 mm shank dia. 3 mm Z3P universal medium cross cut

Item number:

Login / Register
Choose options
Dia. external
Dia. shank
Length, cut
Length, total
Technical information
Tungsten carbide burr ball KUD dia. 04x03 mm shank dia. 3 mm Z3P universal medium cross cut

Dia. external
4 mm
Dia. shank
3 mm
Length, cut
3 mm
Length, total
1.11 /32 Inch
Length, total
34 mm
RPM from, grey cast iron, white cast iron
36000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²
20000 RPM
RPM from, high-temperature-resistant materials
19904 RPM
RPM from, rust and acid-resistant steels
20000 RPM
RPM from, steels up to 1,200 N/mm²
36000 RPM
RPM to, grey cast iron, white cast iron
48000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²
28000 RPM
RPM to, high-temperature-resistant materials
36000 RPM
RPM to, rust and acid-resistant steels
28000 RPM
RPM to, steels up to 1,200 N/mm²
48000 RPM
Packaging unit
1 piece

Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Ball-shaped burr according to DIN 8032 with cut conforming to DIN 8033.

  • Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
  • Long tool life.
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
  • High surface quality.
Recommendations for use
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.
Materials that can be worked
Annealed cast iron
Black annealed cast iron (GTS, GJMB)
Case-hardened steels
Cast iron
Cast steel
Cobalt-based alloys
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hard aluminium alloys
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Stainless steel (INOX)
Steel, cast steel
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Tool steels
White annealed cast iron (GTW, GJMW)
Cutting out holes
Milling out
Surface work
Work on weld seams
Drive types
Drive spindle
Flexible shaft drive
Stationary machines
Straight grinder
Tool machine

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.