Wheel brushes knotted, Pipeline COMBITWIST INOX-TOTAL, with hole

COMBITWIST PIPE brush INOX-TOTAL RBGIT dia. 115x6x22.2 mm stainless steel wire dia. 0.50 mm angle grinders

Item number:: 43300032
EAN:: 4007220808511

COMBITWIST PIPE brush INOX-TOTAL RBGIT dia. 115x6x22.2 mm stainless steel wire dia. 0.50 mm angle grinders 2

COMBITWIST PIPE brush INOX-TOTAL RBGIT dia. 115x6x22.2 mm stainless steel wire dia. 0.50 mm angle grinders 3

COMBITWIST PIPE brush INOX-TOTAL RBGIT dia. 115x6x22.2 mm stainless steel wire dia. 0.50 mm angle grinders 4

COMBITWIST PIPE brush INOX-TOTAL RBGIT dia. 115x6x22.2 mm stainless steel wire dia. 0.50 mm angle grinders Youtube

Technical data

Retailers-Search

Matching accessories & spare parts

Arbor for brushes with hole BO 8/22,2 100-125

Technical information

COMBITWIST PIPE brush INOX-TOTAL RBGIT dia. 115x6x22.2 mm stainless steel wire dia. 0.50 mm angle grinders

Dia. external: 115 mm
Dia. filament material: 0.5 mm
Dia. hole: 22.2 mm
Filament material: Stainless steel wire (INOX)
Length, filament: 22 mm
Max. RPM: 12500 RPM
Mounting system: Centre hole
Number, knots: 36 pcs.
Packaging: POS packaging
RPM, optimum, from: 5000 RPM
RPM, optimum, to: 12500 RPM
Width: 6 mm
Packaging unit: 1 piece

Description

Very aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction.

In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type. They are particularly well-suited to use in extremely critical environments.

In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) withstands temperatures up to 450 °C.

The brush is degreased and does not leave any oil residue on the workpiece.

Advantages

Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams.
Maximum economic efficiency due to maximum tool life and stock removal rate.
High level of comfort thanks to smooth running with no brush recoiling.
Suitable for work on corners and edges as the knots are less likely to unravel.
Aggressive brushing effect due to the very stiff wire knots.
Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A).
Very good corrosion resistance.

Recommendations for use

Please observe the recommended rotational speeds.
For optimum results, use on powerful speed-adjustable angle grinders.

Materials that can be worked: Aluminium; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing heat discolouration; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams