UGT HSS DIN 335 C90

HSS conical and deburring countersink UGT 90° dia. 12.4 mm shank dia. 8 mm DIN 335 C with unequal pitch

Item number:
25202171
EAN:
4007220420478

Login / Register
Choose options
Diameter
Technical information
HSS conical and deburring countersink UGT 90° dia. 12.4 mm shank dia. 8 mm DIN 335 C with unequal pitch

Angle
90 °
Dia. shank
8 mm
Diameter
12.4 mm
Length, total
2.13 /64 Inch
Length, total
56 mm
RPM from, grey cast iron, white cast iron
260 RPM
RPM from, rust and acid-resistant steels
260 RPM
RPM from, soft non-ferrous metals
390 RPM
RPM from, steels up to 700 N/mm²
390 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP)
260 RPM
RPM to, grey cast iron, white cast iron
260 RPM
RPM to, rust and acid-resistant steels
390 RPM
RPM to, soft non-ferrous metals
520 RPM
RPM to, steels up to 700 N/mm²
520 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP)
390 RPM
Version
HSS UGT
Packaging unit
1 piece
Description

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds.

High-performance tools with a countersink angle of 90° for countersinking 90° screws for all common materials such as steel, cast steel and non-ferrous metals. Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results.

Advantages
  • Very high stock removal rate and optimum chip removal.
  • Burr-free results even at low cutting speeds.
  • Long tool life.
  • High workpiece surface quality.
  • Smooth running.
  • Low countersinking force and a good surface quality.
  • Specially developed geometry with wide flutes for optimal chip removal and heat dissipation.
Recommendations for use
  • Use cutting oil or compressed air as a coolant/lubricant.
  • Particularly well suited to producing exact countersinks.
Materials that can be worked
Aluminium
Annealed cast iron
Black annealed cast iron (GTS, GJMB)
Brass
Bronze
Cast iron
Chipboard
Copper
Elastomers
Fibre-reinforced thermosetting plastics (GRP, CRP)
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hard aluminium alloys
Hard non-ferrous metal
Hardwood
Other
Other non-ferrous metals
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Soft titanium alloys (tensile strength 500 N/mm²)
Soft wood
Stainless steel (INOX)
Steel
Steel, cast steel
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Thermoplastics
Thermosetting plastics
Titanium
Titanium alloys
Tool steels
Tough aluminium alloys
White annealed cast iron (GTW, GJMW)
Wood
Zinc
Applications
Countersinking
Drive types
Column drill
Power drill
Robot
Stationary machines
Tool machine
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.