Tungsten carbide copy milling burrs, cut 4, inverted cones WKN without end cut

Tungsten carbide copy milling burr 7 mm inverted cone WKN dia. 08x26 mm shank dia. 6 mm Z4 universal medium fine

Item number:: 21155009
EAN:: 4007220244920

Technical data

Retailers-Search

Technical information

Tungsten carbide copy milling burr 7 mm inverted cone WKN dia. 08x26 mm shank dia. 6 mm Z4 universal medium fine

Angle: 4 °
Cut: 4
Dia. external: 8 mm
Dia. shank: 6 mm
Length, construction: 7 mm
Length, cut: 26 mm
Length, total: 2.7 /8 Inch
Length, total: 73 mm
RPM from, hard non-ferrous metals: 10000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 10000 RPM
RPM from, high-temperature-resistant materials: 10000 RPM
RPM from, rust and acid-resistant steels: 10000 RPM
RPM to, hard non-ferrous metals: 14000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 14000 RPM
RPM to, high-temperature-resistant materials: 18000 RPM
RPM to, rust and acid-resistant steels: 18000 RPM
Packaging unit: 1 piece

Description

Tungsten carbide copy milling burrs by PFERD are the perfect tools for levelling elevations, such as weld seams. Thanks to the uncut area, the weld seam can be adjusted to the level of the surrounding surface without this being damaged. Copy milling burrs are used in particular in the repair of cutting and punching blades in tool and mould-making.

Tungsten carbide copy milling burrs with cut 4 are designed for coarse stock removal.

Inverted cone-shaped rotary cutter, tapered towards the shank. Inverted cones WKN are especially well-suited to processing punching tools that are used for processing aluminium.

Advantages

Long tool life and high surface quality.
The uncut area provides optimum contour guidance and protects the workpiece against damage.
Reduced machining time.

Recommendations for use

For accurate contour guidance, copy milling burrs can be used with guide aids.
Observe the recommended rotational speeds.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Bronze; Case-hardened steels; Cast steel; Cobalt-based alloys; Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Straight grinder

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 3/370 RS PGAS 3/370 RS

Tungsten carbide copy milling burrs, cut 4, inverted cones WKN without end cut

Tungsten carbide copy milling burr 7 mm inverted cone WKN dia. 08x26 mm shank dia. 6 mm Z4 universal medium fine

Matching tool drive

PFERD Newsletter subscription