Tungsten carbide burr set for high performance, cut MICRO HC-FEP

1306 MICRO 3TLG HC-FEP

Item number:: 21901307
EAN:: 4007220724286

New

Technical data Change variant

Retailers-Search

Technical information

Cut: MICRO HC-FEP
Dia. external: 6 mm
Dia. shank: 6 mm
Packaging unit: 1 piece

Description

Tungsten carbide burrs with the MICRO cut with high-quality HICOAT coating HC-FEP are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a much higher stock removal rate than mounted/grinding points and impress with their high milled surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. They also allow for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

The 1306 MICRO HC-FEP set contains three tungsten carbide burrs with a high-quality HICOAT coating for finishing work in the most common shapes and dimensions. The sturdy plastic box protects the tools against dirt and damage.

Advantages

High-quality HICOAT coating for high hardness and wear resistance.
Unlike with mounted grinding points, there is no change in geometry due to wear and tear.
Use on almost all materials up to 68 HRC.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Particularly well suited to finishing, for very fine cleaning work, corrections in tool and mould construction or for sharpening cutting tools.

Downloads

Tungsten carbide burr set for high performance, cut MICRO HC-FEP

1306 MICRO 3TLG HC-FEP

PFERD TOOLS Newsletter subscription