Tube brushes, micro-abrasive, shank-mounted

Tube brush IBU dia. 3.2x25 mm shank dia. 1.7 mm SiC filament dia. 0.25 grit 1000

Item number:
43679554
EAN:
4007220037164

Login / Register
Choose options
Dia. external
Dia. filament material
Mounting system
Technical information
Tube brush IBU dia. 3.2x25 mm shank dia. 1.7 mm SiC filament dia. 0.25 grit 1000

Dia. external
3.2 mm
Dia. filament material
0.25 mm
Dia. shank
1.7 mm
Filament material
Silicon carbide (SiC)
Grit size
2000
Length, total
4 Inch
Length, total
100 mm
Max. RPM
1000 RPM
Mounting system
Shank
Width
25 mm
Packaging unit
10 pieces
Description

For light deburring, cleaning of holes and cross holes and for work on surfaces.

Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement.

Plastic filament withstands temperatures up to 220 °C.

Advantages
  • Enable maximum precision and efficiency in work on delicate workpieces.
  • Highly flexible, enabling optimal adjustment to the workpiece contour.
  • The dimensional accuracy of the workpieces remains unchanged.
  • With tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
  • The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.
  • Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Recommendations for use
  • Please observe the recommended rotational speeds.
  • Use with clockwise rotation.
  • Use coolant for applications where large amounts of heat are produced.
Safety notes
  • For safe use, guide the brush into the workpiece before commencing any work.
  • When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.
Materials that can be worked
Aluminium
Bronze
Cast iron
Cast steel
Cobalt-based alloys
Other non-ferrous metals
Stainless steel (INOX)
Steel, cast steel
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Thermoplastics
Thermosetting plastics
Wood
Applications
Cleaning
Deburring
Roughening
Structuring (matt finishing, brush matting and satin finishing)
Drive types
Flexible shaft drive
Manual application
Power drill
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.