End brushes crimped long, shank-mounted

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.30

PBUL 1010/6 INOX 0,30

Item number:: 43216006
EAN:: 4007220659229

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.30 1

Technical data Change variant

Retailers-Search

Choose options

Dia. external

10 mm

Dia. filament material

0.2 mm 0.3 mm

Filament material

Stainless steel wire (INOX) Steel wire (ST)

Reset Filter

Technical information

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.30

Dia. cup: 10 mm
Dia. external: 10 mm
Dia. filament material: 0.3 mm
Dia. shank: 6 mm
Filament material: Stainless steel wire (INOX)
Length, filament: 20 mm
Length, total: 120 mm
Max. RPM: 20000 RPM
Mounting system: Shank
RPM, optimum: 3.500 - 9.000 RPM
Packaging unit: 10 pieces

Description

Suitable for light brushing such as deburring, cleaning and derusting. Particularly long version to access deep areas.

End brush with plastic-covered brush body.

In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310/1.4301 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD TOOLS brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310/1.4301 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

End brush with plastic-covered brush body. Temperature resistance up to 450 Â°C.

Advantages

Creates fine surfaces.
The plastic covering prevents the risk of corrosion.
Very good corrosion resistance.
The brush is degreased and does not leave any oil residue on the workpiece.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Aluminium; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening

Drive types: Drive spindle; Flexible shaft drive; Power drill; Straight grinder

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/52 RS PGAS 4/52 RS

Robot spindles for stationary application PWAS 4/52 RS PWAS 4/52 RS

End brushes crimped long, shank-mounted

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.30

PBUL 1010/6 INOX 0,30

Matching tool drive

PFERD TOOLS Newsletter subscription