Conical shape with radius end KEL Z5 HC-FEP

Tungsten carbide high-performance burr conical shape KEL dia. 12x30 mm shank dia. 6 mm Z5 HICOAT coated universal fine

KEL 1230/6 Z5 HC-FEP

Item number:: 21125257
EAN:: 4007220722886

New

Tungsten carbide high-performance burr conical shape KEL dia. 12x30 mm shank dia. 6 mm Z5 HICOAT coated universal fine 1

Technical data

Retailers-Search

Technical information

Tungsten carbide high-performance burr conical shape KEL dia. 12x30 mm shank dia. 6 mm Z5 HICOAT coated universal fine

Angle: 14 °
Cut: 5 HC-FEP
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 30 mm
Length, total: 70 mm
RPM, hard non-ferrous metals: 12.000 - 16.000 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 12.000 - 16.000 RPM
RPM, high-temperature-resistant materials: 12.000 - 20.000 RPM
RPM, rust and acid-resistant steels: 12.000 - 16.000 RPM
RPM, steels up to 1,200 N/mm²: 16.000 - 20.000 RPM
Radius corner design: 2.6 mm
Packaging unit: 1 piece

Description

Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Conical burr with round radius end according to DIN 8032 with cut conforming to DIN 8033.

Advantages

High-quality HICOAT coating for high hardness and wear resistance.
Good surface quality.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Materials that can be worked: Bronze; Case-hardened steels; Cast steel; Cobalt-based alloys; Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centres; Flexible shaft drive; Straight grinder; Tool machine

Downloads

Conical shape with radius end KEL Z5 HC-FEP

Tungsten carbide high-performance burr conical shape KEL dia. 12x30 mm shank dia. 6 mm Z5 HICOAT coated universal fine

KEL 1230/6 Z5 HC-FEP

PFERD TOOLS Newsletter subscription