HSS rotary cutters, cut ALU, pointed tree shape K

HSS rotary cutter ALU pointed tree shape K dia. 16x30 mm shank dia. 6 mm aluminium/non-ferrous

Item number:: 22441816
EAN:: 4007220059517

Technical data

Retailers-Search

Technical information

HSS rotary cutter ALU pointed tree shape K dia. 16x30 mm shank dia. 6 mm aluminium/non-ferrous

Cut: ALU
Dia. external: 16 mm
Dia. shank: 6 mm
Length, cut: 30 mm
Length, total: 2.3 /4 Inch
Length, total: 70 mm
RPM from, soft non-ferrous metals: 4000 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %: 4000 RPM
RPM to, soft non-ferrous metals: 6000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %: 6000 RPM
Packaging unit: 1 piece

Description

The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminium alloys, plastics, fibre-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.

Pointed tree-shaped burr, flattened tip.

Advantages

Highly aggressive.
Can be used at low rotational speeds.
Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Materials that can be worked: Aluminium; Brass; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Plastics; Soft aluminium alloys; Thermoplastics; Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/52 RS PGAS 4/52 RS

HSS rotary cutters, cut ALU, pointed tree shape K

HSS rotary cutter ALU pointed tree shape K dia. 16x30 mm shank dia. 6 mm aluminium/non-ferrous

Matching tool drive

PFERD Newsletter subscription